ANNUAL TUNE UP TO INCLUDE:

• INSPECT OIL TANK, CHANGE FILTER, CHANGE STRAINER, TEST FLOW OUT OF TANK, TEST FUEL PRESSURE AND LOCKUP
• REPLACE NOZZLE, VERIFY UNIT IS NOT OVERFIRED, CLEAN DRAWER ASSEMBLY
• INSPECT ELECTRODES AND RESET OR REPLACE AS NEEDED (RIELLO SET AT 1/4″GAP), INSPECT END CONE AND BURNER TUBE FOR DEFECTS
• TEST IGNITOR/TRANSFORMER, TEST PRIMARY SAFETY TIMING, REMOVE PUMP CHECK COUPLING AND PUMP SEAL
• REMOVE SMOKE PIPE, CHECK CHIMNEY LINER/MATERIAL, VACUUM SMOKE PIPE, VACUUM HEAT EXCHANGER FROM ALL POSSIBLE LOCATIONS, VERIFY THREE (3) SCREWS IN EACH JOINT FOR SMOKE PIPE, VACUUM CHAMBER AND INSPECT CHAMBER LINING
• LUBE CIRCULATORS, IF REQUIRED
• VERIFY EXPANSION TANK IS STILL IN WORKING ORDER, CHECK WATER FEEDER OPERATION, VERIFY HYVENT OPERATION, VERIFY NO SYSTEM LEAKS INCLUDING RELIEF VALVE
• FIRE UNIT AND PREFORM SMOKE TEST, TEST CAD CELL OHM READING, PREFORM EFFICIENCY TEST AND PRINT RESULTS (FINAL ADJUSTMENTS MADE WITHIN 20 DEGREES OF HIGH LIMIT SETTING), LEAVE RESULTS WITH SERVICE TAG, FILL OUT SERVICE TAG AND DATE
• CHECK FOR ALL ZONES RETURNING HOT, VERIFY UNIT HIGH LIMIT OPERATION
• EXPLAIN ALL PROCESSES TO CUSTOMER AND FINDINGS, FIRE UNIT IN FRONT OF CUSTOMER, ASK CUSTOMER IF THEY HAVE ANY QUESTIONS

 
MATERIALS INCLUDED:

• FILER, STRAINER, NOZZLE
• RAGS AND CLEAN UP SUPPLIES
• HAZARDOUS MATERIALS AND CLEANERS
• OIL DISPOSAL

 
PARTS SOLD SEPARATELY:

• FUEL TREATMENT